Config pc entreprise
Posté : 07 févr. 2021, 14:11
Bonjour,
je vais monter mon entreprise et j'aurais besoin d'un pc qui aura pour principale utilisation autocad/cadwork avec 2 ecrans.
J'aurais aimé avoir votre avis sur la config que j'ai préparé et voir s'il y a des choses a modifier. J'ai un budget d'environs 1200/1300 euros.
Voici ce que j'ai préparé:
Carte graphique: NVIDIA Quadro P620 DVI V2
Carte mère: Gigabyte Z390 UD
Processeur: Intel Core i7-9700K (3.6 GHz / 4.9 GHz)
venti: be quiet! Dark Rock 4
ram: Corsair Vengeance LPX Series Low Profile 16 Go (2x 8 Go) DDR4 3000 MHz CL15
boitier: Antec VSK-4000B-U3/U2
SSD: Crucial MX500 500 Go
HDD: Seagate BarraCuda 2 To (ST2000DM008)
Alim: Textorm TX500+
Lecteur cd: ASUS DRW-24D5MT
Merci d'avance pour votre temps et réponses.
je vais monter mon entreprise et j'aurais besoin d'un pc qui aura pour principale utilisation autocad/cadwork avec 2 ecrans.
J'aurais aimé avoir votre avis sur la config que j'ai préparé et voir s'il y a des choses a modifier. J'ai un budget d'environs 1200/1300 euros.
Voici ce que j'ai préparé:
Carte graphique: NVIDIA Quadro P620 DVI V2
Carte mère: Gigabyte Z390 UD
Processeur: Intel Core i7-9700K (3.6 GHz / 4.9 GHz)
venti: be quiet! Dark Rock 4
ram: Corsair Vengeance LPX Series Low Profile 16 Go (2x 8 Go) DDR4 3000 MHz CL15
boitier: Antec VSK-4000B-U3/U2
SSD: Crucial MX500 500 Go
HDD: Seagate BarraCuda 2 To (ST2000DM008)
Alim: Textorm TX500+
Lecteur cd: ASUS DRW-24D5MT
Merci d'avance pour votre temps et réponses.