Config pour traitement video et branchement cameras IP HD

Conseils d'achat pour une config PC complète ou des composants : cartes mères, processeurs, mémoires, disques durs, boîtiers, cartes graphiques, alimentations, disques durs, SSD...
snap2001
Apprenti geek
Apprenti geek
Messages : 1
Enregistré le : 25 nov. 2012, 20:33

Config pour traitement video et branchement cameras IP HD

Message non lu par snap2001 »

Bonjour à tous,
Avec l'arrivée des cameras HD IP et des logiciels de surveillance , j'ai besoin de d'adapter une config PC litteralement dédiée à cet usage.
Pour des raisons perso j'ai besoin de connecter d'ajouter plusieurs camera IP (environ 10)
le logiciel de traitement sera ispy
Pour aider voici ce que répond un membre du forum ispy:

"
Upgrading a CPU to an I7 will definitely help, that is a lot of cameras and therefore a lot of traffic that it needs to process.
There is really no way to say what would be the best, since a lot of factors contribute to CPU load. Framerates, resolution, how often you are comparing frames for motion detection, memory speed, Motherboard front bus speed, network card, etc...
Literally everything that has anything to do with the throughput of the data that moves through the system will have an effect on the overall CPU usage and usability of the system. For example, if the memory is not fast enough to process the amount of frames in and out of ram without inducing wait states, the CPU will take a usage hit since it has to wait on the memory and retry things as the application asks for the data. Just an example, but you see what I mean.
For your setup I would definitely recommend an I7 on a MB with the fastest FSB you can reasonably get, fast RAM running in Dual-Buffered mode. An SSD (Solid State Drive) would also be a good idea."


Pouvez vous m'aider à trouver la config adequate qui m'éviterait les gels d'image ? il me faudrait également une sortie HDMI quelquepart pour visualiser sur un ecran télé. pas trop chère la config non plus , mais la plus efficace..
AH oui le PC sera situé dans ma chambre donc il faut qu'il soit hyper silencieux

Merci beaucoup !!
Avatar du membre
shadelv
Overclockeur
Overclockeur
Messages : 1157
Enregistré le : 17 déc. 2009, 00:00

Re: Config pour traitement video et branchement cameras IP H

Message non lu par shadelv »

Quel est ton budget ?
Ce qu'il dit est très sensé.
En gros, un bon i7, une cm avec un bon débit du bus, 16 ou 32 ram avec une bonne fréquence et des bon timings, profiter du dual/triple/quad channel, un gros ssd, peut-être un bonne carte réseau ethernet, ducâble de qualité...
Il faudra peut-être une plateforme 2011, ça coûte cher.
Répondre